Total Pageviews

Thursday 25 April 2013

RC Aircrafts

Carl Goldberg
Super Chipmunk EP ARF Specifications
Stock Number: GPMA1928
Wingspan: 38 in (965 mm)
Wing Area: 242 in² (15.6 dm²)
Weight: 23-25 oz (650-710 g)
Wing Loading: 13.7-14.8 oz/ft² (42-45 g/dm²)
Length: 28 in (710 mm)
Requires: 4-channel radio with 4 micro servos, 400-size brushless motor (28-30-950kV), 25A ESC, 11.1V 1200-1500mAh LiPo battery & propeller
Super Chipmunk molded cowl and wheel pants
The molded cowl and wheel pants are already painted, for fast final assembly and scale looks.
Super Chipmunk dual aileron servos
Each wing half uses its own aileron servo to simplify assembly, increase precision and allow mixing.
Super Chipmunk in flight
The Super Chipmunk’s low parts count and generous supply of included hardware help you get into the air quickly.
Super Chipmunk steerable tailwheel
For easy ground handling, the model includes a steerable tailwheel.

PHAZER

Don’t blink when flying the Phazer. It can travel the length of a football field in just over two seconds! With its simple delta wing design, this EDF assembles quickly, too — the fuselage is painted fiberglass and the wings are built-up balsa and ply, already covered in MonoKote film. In no time, you can be airborne…accelerating with ducted fan power and speed.
  • Fast and easy to assemble.

  • Sleek fiberglass fuselage and tail fin.

  • Includes HyperFlow ducted fan unit with Ammo  brushless motor.
GPMA1802
Wingspan: 23 in (585 mm)
Wing Area: 224 in² (14.4 dm²)
Weight: 30-31.5 oz (850-895 g)
Wing Loading: 19.3-20.2 oz/ft² (59-62 g/dm²
Length: 30 in (760 mm)
Requires: 3-channel radio with 2 micro servos and elevon (or ailevator) mixing; 35A brushless ESC (min) & 14.8V (4S) 2200mAh LiPo battery

WARNING: The Phazer requires advanced flying skills and is not suitable for beginning or intermediate pilots. It reaches speeds over 90 mph (145 km/h) and should be flown only at an approved AMA flying site. Because it can quickly disappear from sight, pilots should remain focused on the plane at all times.


GPM Phazer EDF ARF wing assembly
Built up from lightweight balsa and ply, the wing halves slide together onto a joiner tube and align easily for gluing. The delta design speeds assembly and requires only two servos.
GPM Phazer EDF ARF ducted fan unit
The included HyperFlow™ ducted fan unit with Ammo™ 3790kV brushless motor installs easily and produces impressive thrust and speed.
GPM Phazer EDF ARF magnetic canopy and battery hatch
The magnetically attached canopy doubles as a battery hatch, simplifying the installation of LiPos and radio gear.
GPM Phazer EDF ARF bungee launch
The Phazer can be hand-launched, or you can use the included bungee for even easier launching. Fuselage skids help the model track straight and protect linkages during landings.
GPM Phazer EDF ARF fiberglass fuse, MonoKote Covering
The Phazer features built-up wings with MonoKote film covering, and a fiberglass fuselage with molded-in inlets and exhaust tube. Its trim scheme is factory-applied.
GPM Phazer EDF ARF decal sheet
Great Planes includes these decal options that allow for a custom sport or military look.
GALLERY
GPM Phazer EDF ARF GPM Phazer EDF ARF GPM Phazer EDF ARFGPM Phazer EDF ARF GPM Phazer EDF ARF GPM Phazer EDF ARFGPM Phazer EDF ARF GPM Phazer EDF ARF GPM Phazer EDF ARF

No comments:

Post a Comment